P/N: F80226-2
727 / 737 Nose Mooring
Used in conjunction with a suitable restraining cable & tiedown, furnished by customer, to facilitate mooring of the airplane. (F80226-2 flyaway kit)
Four Required.
For more information contact: TFASI
August 2 2011
AD #2908
P/N: 4936855
NLG drag link knee hinge nut adapter
MD80 series
For more information contact: TFASI
July 13 2011
AD #2891
P/N: MIT65B81226
Spanner sockets elevator control feel unit
Used to torque nuts (BACN10 grip) on camshaft assembly (65B81228) of feel unit assembly elevator control (65B81226). Two sockets are required, one for each of the camshaft assembly (65B81228).
747
For more information contact: TFASI
June 20 2011
AD #2881
P/N: ST2580-245
3 inch nominal across the flats
Used to tighten & torque the nut used to retain the body gear retract actuator rod end to the threaded boss on the gear.
747
129 Trace
For more information contact: TFASI
June 16 2011
AD #2877
P/N: F70312-15
MLG Fwd trunion bearing retaining nut torque adapter
F70312-15 replaces F72905-1 & is applicable for airplane line no. 936 that have no incorporated SB 57-129.
727
For more information contact: TFASI
March 16 2011
AD #2855
P/N: 2TE65B50357
Manufacture: Industrial Automation
Gas Generator Simulator assembly test Jig. Use to simulate gas generator units during test of emergency escape system on the aircraft & to measure the ability of the actuation cable to operate the trigger mechanism.
747
For more information contact: TFASI
March 1 2011
AD #2842
P/N MIT65B04308-1
Cargo door mechanism torque adapter set. Used to torque the latch mechanism bearing retaining nuts of the forward & aft lower lobe main cargo doors and main deck side cargo door.
747
For more information contact: TFASI
March 1 2011
AD #2841
P/N B1000T-5P
Manufacture: Belknap
Fixed torque, 900 ft lbs and 700 ft lbs
Part 129 trace
For more information contact: TFASI
December 22 2010
AD #2803
PN: 5916816-501
Manufacture: AeroInfo
Used for checkout & adjustment of the Electrical & mechanical positioning of both Servo Actuators during Rigging of the MACH TRIM Compensator Actuator & yaw damper actuator.
MD80 series
Certified 2018
For more information contact: TFASI
February 11 2010
AD #2748
P/N MIT65B40110
Pacific Support Equipment, Ltd
747 (Applicable to QAN only)
Lamp removal tool, Lamp Indicator Module. Used to remove indicator lamp module assemblies from panels (Ref 747 chapter 33 AMM)
For more information contact: TFASI
July 20 2009
AD #2625