↓
 

Things for Aircraft Support, Inc

Commercial Aircraft Tooling and Equipment

Home Page Banner
  • Commercial Aircraft Jacks
  • Commercial Aircraft Tooling
  • Commercial Engine Tooling
  • Ground Support Equipment
  • Military Surplus
  • Contact Us
  • Home
Home→Categories 747-100 - Page 3 << 1 2 3

Category Archives: 747-100

Post navigation

<< 1 2 3

747 RUDDER RATIO CONTROL SYSTEM TEST

Things for Aircraft Support, Inc

P/N TE65B83189
747 Rudder ratio control system test unit
Applicable to 747-100/-200/-300 only.
Used to detect defects in the tested rudder ratio comparator, actuator or controller. The tester allows for voltage readings to be taken with a voltmeter to check for the correct parameters.
Two available
Both Certified
For more information contact:  TFASI
Sept 25 2008

AD #2386

TEST EQUIPMENT

Things for Aircraft Support, Inc

P/N 3TE65B92203
test Equipment – Wing surge tank drain installation.
To plug outlet ends of surge tank drain lines WBL 470 L & R, & hold check valve flapper closed against 10-psi air pressure
MRO trace
747
For more information contact:  TFASI
Aug 05 2008

AD #2334

MALABAR ONE QUART OIL CAN DISPENSER

Things for Aircraft Support, Inc

P/N: WF150-9
Manufacture: Malabar
1 quart can oil dispenser. Low or High flow manual Hand Pump dispenses clean filtered fluid.
For more information contact:  TFASI
June 20 2017

AD #3267

DISPATCH KIT

Things for Aircraft Support, Inc

P/N: 20PRE65B00713
Manufacture: Modern Machine
Dispatch kit – EDP system
To prevent loss of engine oil by blocking attachment boss when the engine-driven hydraulic pump is removed from its mounting pad.
JT9D-7
For more information contact:  TFASI
July 29 2015

AD #3168

SLING – APU GENERATOR

Things for Aircraft Support, Inc

P/N OHME65B98605-1
APU generator sling.
Used to remove & install apu generators (used in conjunction with a fishpole hoist).
747
For more information contact:  TFASI
2009-25-01

AD #2479

VACUUM CLEANER ATTACHMENTS

Things for Aircraft Support, Inc

P/N: MIT65B50274
Manufacture: RAI TEC Industries
Aluminum Vacuum
clean behind dado panels in the main cabin.
For more information contact:  TFASI
Aug 04 2007

AD #2027

ENGINE Holding TOOL SET

Things for Aircraft Support, Inc

CF6-50/80 Holding WrenchesP/N 2C6018G01
stage 1, stage 2, stage 3, stage 4, stage 5, stage 6 holding wrenches CF6-50 / CF6-80C2
For more information contact:  TFASI
2008-08-05

AD #2342

Post navigation

<< 1 2 3

Looking for discontinued or hard to find tools?

We source surplus tooling and equipment for the Commercial Aircraft industry.

Email: john@things4acft.com

↑