P/N: ST2580-245
3 inch nominal across the flats
Used to tighten & torque the nut used to retain the body gear retract actuator rod end to the threaded boss on the gear.
747
129 Trace
For more information contact: TFASI
June 16 2011
AD #2877
Category Archives: 747-400
TORQUE ADAPTER SET
P/N MIT65B04308-1
Cargo door mechanism torque adapter set. Used to torque the latch mechanism bearing retaining nuts of the forward & aft lower lobe main cargo doors and main deck side cargo door.
747
For more information contact: TFASI
March 1 2011
AD #2841
LOCK ASSEMBLY
P/N 6ME65B02200-1
Manufacture: Pacific Support Equipment, LTD
Inboard Aileron Locks Left & Right
Used to lock either of the inboard ailerons in any of three positions for maintenance. 20 degrees up, 20 degrees down or faired.
747 ALL (except -800)
For more information contact: TFASI
2009-26-01
AD #2480
DOOR LATCH GAUGE SET
P/N 2MIT65B51544
main door latch gage set
Used to check the over center position of center bell cranks of the upper & lower door gates. (Ref 747 Chapter 52 AMM & CMM)
747
For more information contact: TFASI
Oct 26 2008
AD #2402
TEST EQUIPMENT
P/N 3TE65B92203
test Equipment – Wing surge tank drain installation.
To plug outlet ends of surge tank drain lines WBL 470 L & R, & hold check valve flapper closed against 10-psi air pressure
MRO trace
747
For more information contact: TFASI
Aug 05 2008
AD #2334
MALABAR ONE QUART OIL CAN DISPENSER
P/N: WF150-9
Manufacture: Malabar
1 quart can oil dispenser. Low or High flow manual Hand Pump dispenses clean filtered fluid.
For more information contact: TFASI
June 20 2017
AD #3267
SLING – APU GENERATOR
P/N OHME65B98605-1
APU generator sling.
Used to remove & install apu generators (used in conjunction with a fishpole hoist).
747
For more information contact: TFASI
2009-25-01
AD #2479
LPT Balance Weight Clips
P/N 2C14798G01
Manufacture: CANAM Tool & Engineering, Inc
Used to install (LPT) low pressure turbine Balance Weight Clips on CF6-80C2
For more information contact: TFASI
2008-18-11
AD #2414
VACUUM CLEANER ATTACHMENTS
P/N: MIT65B50274
Manufacture: RAI TEC Industries
Aluminum Vacuum
clean behind dado panels in the main cabin.
For more information contact: TFASI
Aug 04 2007
AD #2027
BRAKE PULLER EQUIPMENT
P/N G32012-1
Manufacture: Pacific Support Equip, LTD
Used in conjunction with axle protector assembly to remove brake assembly from main landing gear.
747-200 / -300, -400
For more information contact: TFASI
Dec 04 2014
AD #2018