Manufacture: REGENT
40 ton tripod jack with towbar
60″ min / 40″ hyd lift /16″ screw / 116″ maximum
737 all series, MD80 series, MD90, B717,
For more information contact: JAMEY
March 10 2025
AD #8797
Category Archives: Commercial Aircraft Jacks
60 TAIL JACK
Manufacture: COLUMBUS / REGENT
60 ton tail jack with new air assist & new load gauge. Certified
230″ min / 76″ hyd lift / 12″ screw / 318″ maximum
747-100 thru 747-800
Fully Overhauled
145 Trace
For more information contact: TFASI
January 28 2025
AD #8767
35 TON FLY-AWAY AXLE JACK
P/N: 8782
Manufacture: MALABAR
35 ton fly-away jack, 6″ min / 10.5″ hyd / 2.5″ screw / 19.5″ max, with air-motor, dual hand pump
757 all wheels, 737classics all wheels, MD80 series, A318, A319, C130 mains & nose, most wide 
body noses
For more information contact: TFASI
April 26 2024
AD #8782
50 TON TRIPOD JACK
P/N: 2955-010
Manufacture: REGENT-COLUMBUS
50 ton main wing jack, 60″ min x 44″ hyd lift, 24″ screw, 128″ max, with airmotor & load gage. fully overhauled
737 all series
For more information contact: TFASI
April 22 2024
AD #8405
33 TON RHINO JACK
P/N: RL3015-001
Manufacture: HYDRO SYSTEMS
Recovery axle jack with towbar.
Min. height: 73 mm / 2.9 inches
Hydr. lift: 564 mm / 22.2 inches
Max. height: 637 mm / 25.1 inches
Jacking Adapter width: 100 mm / 3.9 inches
All narrow body aircraft. 
For more information contact: CPA
March 05 2023
AD# 8157
10 TON AXLE JACK
P/N: 642S
Manufacture: MALABAR
10 ton axle jack.
Applications: B727, DC9, B717, MD80, 737 all series
6″ min X 8.25″ hyd X 3.” screw 17.25″ max
Fully Overhauled Certified & load tested without repaint
For more information contact: TFASI
Feb 11 2023
AD #8152
8.75 TON AXLE JACK
P/N: MA81 Z
Manufacture: ZELOSO
8.75 ton axle jack.
Applications: 737-200 thru -500, B717, MD80, MD90
6.50″ minimum, 7.87″ hydraulic lift, 3.15″ screw, 17.5″ max height
For more information contact: TFASI
Feb 08 2023
AD #8137
WHEEL ADAPTER
P/N: C202-11-000-1
Manufacture: BAUER
Main wheel adapter
Used for building up wheels on A300 aircraft.
For more information contact: TFASI
Nov 15 22
AD #8078
WHEEL ADAPTER
MODEL: BEI3840-747-M-F-I
Manufacture: BAUER
Main wheel adapter
Used for building up wheels on 747 aircraft.
For more information contact: TFASI
Nov 15 22
AD #8070
747 TAIL SUPPORT STANCHION
Model: A04093D
Manufacture: WASP
12.5 ton tail stanchion. Operated with 12 volt and hand pump.
197″ min / 275″ maximum
Built to Boeing specs.
747 cargo
Requires overhaul
For more information contact: TFASI
Aug 10 2022
AD #8014